People often use polishing and coating interchangeably. They are opposite approaches, and knowing which one you are asking for changes the whole conversation.
Grinding down rather than building up
A coating adds a new layer. Polishing removes material, working through progressively finer diamond grits until the slab takes a sheen of its own, then hardening and sealing that surface.
The result is the concrete itself. There is no film to peel, chip or delaminate, because there is no film.
What it looks like
Polished concrete shows what is in the slab. Sand, aggregate and the natural variation of the pour all become part of the finish, and how much of that shows depends on how far down the grinding goes.
Sheen is a choice as well, from a soft satin through to a high gloss. It is a quieter, more architectural look than flake, which is exactly why some people want it.
Where it suits, and where it does not
It works well indoors on sound slabs: living areas, workshops, showrooms and commercial floors that take traffic and want low maintenance.
It is less suited to a slab that is badly damaged, heavily patched or contaminated, because polishing reveals the concrete rather than covering it. On those floors a coating is usually the better and more predictable result.
Living with a polished floor
Maintenance is simple. Dust mop and damp mop; there is no wax cycle and no stripping.
Sealing still matters, particularly against staining, and the same grip additive used on exterior work can be specified where a polished floor might get wet.
Questions about polished concrete
Can any concrete floor be polished?
No. The slab has to be sound and reasonably clean of contamination and heavy patching. Whether yours is a candidate is something that needs looking at, not guessing at.
Is polished concrete slippery?
A polished surface can be slick when wet, which is why a grip additive is specified where that is a realistic risk. Dry, it has more traction than most people expect.
How is it different from an epoxy floor?
An epoxy floor is a new surface applied over the slab, with colour and flake chosen by you. Polishing refines the slab you already have, so the look comes from the concrete itself.
